Map Extract
Free tool

Plus Code converter: Open Location Code to latitude and longitude

Turn Plus Codes into latitude and longitude, or coordinates into Plus Codes, one per line and as many lines as you like. Short codes with a town after them, the form Google Maps shows on listings, are completed using a built-in town list or a reference point you choose.

Runs in your browser. Nothing you enter is uploaded.

Converting codes and coordinates

  1. Paste the lines

    Type or paste into Plus Codes or coordinates, one per line. A line can be a full code (9C3XGV5C+6Q), a short code followed by a town (GV5C+6Q London), or a decimal latitude and longitude (53.4808, -2.2426). Each line is converted in the direction it needs, and up to 5,000 lines are read.

  2. Choose a code length

    Code length for coordinates sets how precise new codes are. Ten digits, the length Google Maps shows, is the default. Eight gives a block of about 275 metres; eleven narrows it to about 3 metres.

  3. Set a reference if you need one

    Short codes without a recognised town need a Reference town or a typed reference point. With a reference set, coordinates also get a short code relative to it, in the familiar XW67+23 form.

  4. Read the table

    Each row shows the full code, any short code, the coordinates of the code's centre (linked to Google Maps), the size of the code area and a note for anything that could not be converted.

  5. Export

    Download CSV saves every row. Copy Plus Codes and Copy coordinates copy one column, keeping blank lines for failures so the order still matches your input.

Example: codes from listings, coordinates from a spreadsheet

The first three lines are codes as they might be copied from map listings: one full and two short with a town. London and Leeds are in the built-in list, so both short codes are completed. The last two lines are coordinates, which come back as ten-digit codes. The area column shows how the rectangle narrows from west to east as you go north, because lines of longitude converge.

With York chosen as the reference town, the coordinates 53.9600, -1.0873 would come back as 9C5WXW67+23 with the short code XW67+23, and typing XW67+23 on its own would recover the same full code.

Input
9C3XGV5C+6Q
GV5C+6Q London
CX+GH Leeds
53.4808, -2.2426
55.9533 -3.1883
Result
plus_code,reference,latitude,longitude,area_size_m
9C3XGV5C+6Q,,51.5080625,-0.1280625,14 m x 8.7 m
9C3XGV5C+6Q,London,51.5080625,-0.1280625,14 m x 8.7 m
9C5WRCCX+GH,Leeds,53.8213125,-1.5510625,14 m x 8.2 m
9C5VFQJ4+8X,,53.4808,-2.2426,14 m x 8.3 m
9C7RXR36+8M,,55.9533,-3.1883,14 m x 7.8 m

How much ground each length covers

Each pair of characters before the plus sign divides the previous cell by 20 in both directions. From the eleventh character on, each one splits the cell into a grid of 5 rows by 4 columns. Heights are the same everywhere; widths shrink away from the equator, so the last column is worked out for Manchester's latitude.

DigitsExample (Manchester)Cell heightCell width at 53.5° N
29C000000+about 2,200 kmabout 1,300 km
49C5V0000+about 111 kmabout 66 km
69C5VFQ00+about 5.6 kmabout 3.3 km
89C5VFQJ4+about 278 mabout 165 m
109C5VFQJ4+8Xabout 14 mabout 8.3 m
119C5VFQJ4+8XCabout 2.8 mabout 2.1 m
129C5VFQJ4+8XC5about 0.6 mabout 0.5 m

Short codes and why they need a reference

A full code begins with characters that pin down the region: 9C covers a large block of north-west Europe and 9C5W narrows that to a cell of about 111 km containing York. Inside a town everybody already knows those first four characters, so map apps drop them and print the town instead, as in XW67+23 York. Turning that back into coordinates needs the missing characters, and they come from a reference point near the code.

The converter takes the first four characters from the reference and then checks the neighbouring cells, choosing whichever full code lies closest to the reference. That matters at cell edges: a business just south of a boundary can have a different prefix from the town centre north of it, and simply gluing on the town's prefix would put it about 111 km away. Recovery is reliable while the reference is within roughly 50 km of the real location, which a town name normally is.

The built-in list covers 23 large towns and cities in the UK, plus Dublin. A town name that is not on the list produces an error asking for a reference point, rather than a guess. The algorithm follows the published Open Location Code specification (Apache License 2.0) and is checked against its reference test values.

Checks before you rely on a converted code

  • Confirm that short codes were completed with the right town by reading the reference shown in each row.
  • Open two or three of the coordinate links and make sure they land where you expect.
  • Keep ten-digit codes for buildings and use eight digits only when you mean a whole block or estate.
  • Do not treat a Plus Code as proof of an address: it describes a spot on the ground, not who occupies it.

Questions people ask

How do I convert a Plus Code to latitude and longitude?

Paste the code into the box. A full code, with eight characters before the plus sign, converts straight away to the latitude and longitude of the centre of its rectangle. A short code needs a nearby place: write a town after it, such as GV5C+6Q London, or choose a reference town or point under the box.

What does the town after a short Plus Code mean?

It stands in for the characters that were removed from the front of the code. XW67+23 York means the full code that starts with York's first four characters, 9C5W, and ends with XW67+23. Any point near York gives back those characters, which is why the town name is enough to recover the full code.

How accurate is a ten-digit Plus Code?

A ten-digit code names a rectangle 0.000125 degrees on each side, about 14 metres from south to north. Its east to west width shrinks with distance from the equator, to about 8 metres across most of Britain. The coordinates shown are the centre of that rectangle, so any point inside it is at most a few metres away.

Why does my short code give an error?

Either the town after it is not in the built-in list, or no town and no reference were given. Choose the nearest listed town, or type a latitude and longitude near the place in reference point and the code will be completed. An error can also mean a typing slip: Plus Codes never contain vowels, and characters such as 1, 0 (except as padding) or A are not used.

Are Plus Codes the same as what3words?

No. Plus Codes come from an open, published algorithm that anyone can implement and use offline, which is how this page converts them without sending anything. what3words is a separate proprietary system based on word triplets. The two cannot be converted into each other directly; go through latitude and longitude.

Where your data goes

Plus Codes are decoded and encoded by the code on this page, so neither the codes nor the coordinates you paste leave your browser. The town list is built into the page, not looked up. Coordinate links open Google Maps only if you click one.

Checked against the tool on

Top