Two ways to use it
Enter the original value
The starting figure: last year's price, last month's leads or the old retainer.
Enter the new value
The figure you are comparing with. The result is labelled increase or decrease to match.
Or apply a change
Type a percentage in the third box, such as 4 for a 4% rise or -12.5 for a 12.5% cut, and the last result shows the original after that change.
Use the multiplier
The multiplier is new divided by original. Multiply any other figure by it to apply the same change.
Example: putting up a monthly retainer
A bookkeeping firm charges a client £1,250 a month and proposes £1,475 from April. The calculator shows a percentage increase of 18%, a difference of £225 and a multiplier of 1.18.
The client pushes back and asks what a cut of 8% from the current fee would look like instead. Typing -8 in the third box gives £1,150. With both figures on screen, the firm can explain its proposal with real numbers rather than round guesses.
Original value 1250 New value 1475 Or apply a change of -8%
Percentage increase 18% Difference 225 Multiplier x 1.18 Original -8%: 1,150
Why up and down are not symmetrical
Percentage change is always measured against the value you start from, as the note under the tool reminds you.
| Start | Change | Result | Change needed to get back |
|---|---|---|---|
| 100 | +20% | 120 | -16.67% |
| 100 | -20% | 80 | +25% |
| 1,250 | +18% | 1,475 | -15.25% |
| 100 | +50% | 150 | -33.33% |
Reporting changes clearly
When a figure is itself a rate, such as a conversion rate going from 2% to 3%, say whether you mean a rise of one percentage point or a rise of 50%. Both are true and they sound very different to a client.
For price rises, telling customers both the percentage and the new amount avoids confusion, and it helps to give notice. If a price includes VAT, apply the change to the net price and then add VAT, so the VAT stays correct.
Questions people ask
How do I calculate a percentage increase?
Find the gap between the two figures and compare it with the starting one. A retainer moving from £1,250 to £1,475 has grown by £225; £225 set against £1,250 is 0.18, or 18%. The calculator shows that percentage together with the £225 gap and the 1.18 multiplier.
How do I calculate a percentage decrease?
Exactly the same way, except the gap is a fall. Going from 80 to 60 loses 20, and 20 compared with the starting 80 is a quarter, so the drop is 25%. The calculator labels the result as a decrease so the direction is never in doubt, and shows the difference as a negative figure.
How do I add a percentage to a number?
Multiply the number by one plus the percentage as a decimal. To add 4% to £1,250, multiply by 1.04 to get £1,300. In the calculator, type 4 in the apply a change box and the result shows the original value after the increase.
Why does a 20% rise followed by a 20% cut not get back to the start?
Because the cut is taken from the higher figure. £100 up 20% is £120, and 20% of £120 is £24, so cutting 20% leaves £96. To return to £100 from £120 you would need a cut of about 16.67%, which is the kind of gap the table above illustrates.
Where your data goes
Values are compared and changed by script on this page, and nothing you type is sent off your device.
Checked against the tool on