Map Extract

Planning application leads come from council planning registers: each application shows a site address, a description of the proposed work, an application type, key dates and usually an applicant and an agent. Match the application type to your trade, contact after the decision rather than before it, approach the agent (an architect or planning consultant, which is a business) before the private applicant, and use post with a clear source and opt-out when you do write to a homeowner. There is no complete national feed, so coverage means working council by council.

This guide covers application types by trade, portals and data sources, timing, applicant vs agent, the contact rules, and how to make it a weekly routine. The how-to for searching is in search planning applications by postcode across councils.

What a planning register entry contains

Every local planning authority keeps a public register so that neighbours and consultees can see and comment on proposals. A typical online entry has:

FieldExample (fictional)Useful for
Reference26/01234/HOUSETracking and quoting in letters
Site address14 Orchard Road, KettlebyLocation and radius matching
Proposal"Erection of rear dormer and single-storey rear extension"Trade matching
Application typeHouseholderTrade matching and timing
Received, validated, decision dates2 Sept, 9 Sept, 4 Nov 2026Timing
Status and decisionGranted subject to conditionsWhether work will go ahead
ApplicantName only, or name and addressContact (with care)
AgentName and business address of the architect or consultantB2B contact
DocumentsForms, drawings, decision noticeProject scale and details

Councils usually redact personal phone numbers, email addresses and signatures from published forms. Drawings and reports are the copyright of whoever produced them, so do not reuse them in your marketing.

Application types by trade

The application type tells you more than the description. Planning Portal lists dozens of common projects, from loft conversions to heat pumps; the table below maps the main application types to the trades they suit.

Application typeTypical projectsTrades it suitsNotes
HouseholderExtensions, dormers, porches, garage conversions, outbuildingsBuilders, roofers, scaffolders, glaziers, electricians, plumbers, kitchen and bathroom fitters, plasterersThe richest source for domestic trades
Full planningNew dwellings, conversions to flats, commercial buildingsGroundworkers, builders, M&E contractors, builders' merchants, roofersLarger projects; often a developer or main contractor already in place
OutlinePrinciple of development, often for larger sitesDevelopers, consultantsToo early for most trades
Reserved mattersDetailed design after outline approvalMain contractors, suppliersCloser to a start
Prior approvalLarger home extensions, some changes of use, demolitionBuilders, demolition contractorsShort determination periods
Lawful development certificate (proposed)Work the owner believes is permitted development, often loft conversions and rear extensionsLoft specialists, builders, roofersConfirms the owner is planning work that does not need full permission
Listed building consentAlterations to listed buildings, re-roofing, windowsHeritage joiners, lime plasterers, heritage roofers, sash window specialistsSpecialist work with fewer competitors
Works to trees (TPO or conservation area)Felling, crown reductionTree surgeonsOften decided quickly
Advertisement consentShop signs, illuminated signsSign makersUsually commercial applicants
Change of useShop to café, office to residentialShopfitters, fit-out firms, M&EOften a business applicant
Discharge of conditionsMaterials, drainage, construction management plansAny trade on the projectA strong sign that work is about to start

Two cautions:

  • The register shows only part of the market. Much domestic work, including many re-roofs, internal alterations, solar panels and heat pumps on ordinary houses, can be done under permitted development without an application. Planning Portal's project guides explain the rules for each.
  • Planning is not building control. Building regulations applications and notices are separate and mostly not published in the same way.

To search a council register for these types, see searching planning applications by postcode.

Portals and data sources

Council registers

Each council publishes its own register, usually through one of a handful of software products. Idox Public Access is widely used in England, Wales and Scotland; Northgate Planning Explorer and several others are also in use. They share features: simple search by reference, postcode or address; advanced search by type, ward, parish and date ranges; weekly and monthly lists of validated and decided applications; and a map search. Saved searches and email alerts usually need a free account. See searching planning applications by postcode.

To find which council covers an address, use Planning Portal's find your local planning authority tool, which accepts a postcode.

The national planning data platform

The government's Planning Data platform for England publishes planning and housing datasets under the Open Government Licence, with a map, bulk downloads and an API. It includes a planning application dataset, but the dataset page says it "is incomplete and is not yet ready for use". It is useful for supporting layers such as conservation areas, Article 4 direction areas and listed buildings, which tell you where heritage or restricted work is likely. Do not rely on it for application coverage yet.

Scotland, Wales and Northern Ireland

  • Wales: councils run their own registers, much as in England.
  • Scotland: each council runs its own planning search portal.
  • Northern Ireland: a regional Planning Portal covers most councils, searchable by reference, address or map; nidirect notes that Mid Ulster uses its own portal.

Commercial aggregators

Several services collect applications from many councils and send alerts by trade. They save time; check how they collect the data, how current it is and what they let you do with applicant details.

Timing: when to make contact

StageWhat it meansWho to contactTypical timing
Received and validatedThe application is complete and under considerationUsually no one; the design may still change8 weeks for most applications, 13 for major development, 16 where an EIA applies (statutory periods)
Decided: grantedThe project can go ahead, subject to conditionsAgent, then applicantOwners gather quotes in the weeks and months after
Decided: refusedIt cannot go ahead as proposedNo oneAn appeal or revised application may follow
Discharge of conditions submittedPre-commencement details are being agreedAgent or applicantWork often starts soon after
Approaching expiryPermission normally lasts three years unless the decision says otherwiseApplicant, if work has not startedLate-stage reminder

Contacting after the decision is both more useful and more respectful: the owner knows the project is going ahead, and you are not marketing to someone whose plans might be refused. The statutory periods come from government guidance on determining applications; real decision times vary by council.

Applicant vs agent

Most householder applications are submitted by an agent on the owner's behalf: an architect, architectural technologist, planning consultant or design-and-build firm. That changes who you should contact first.

The agent is a business. If it is a limited company or LLP it is a corporate subscriber under PECR, so B2B marketing email is allowed without prior consent provided you identify yourself and offer an opt-out. Agents see dozens of projects a year and are often asked by clients to recommend contractors. A good relationship with three local architects can be worth more than a hundred letters to homeowners. Treat this as ordinary B2B prospecting.

The applicant is often a private householder. Their name and address are personal data, and they did not submit an application to receive sales letters. If you write to them:

  • Use post. PECR does not cover postal marketing, and you will not have their email or phone number from the register anyway. Do not try to find a private applicant's personal email or mobile from other sources.
  • Have a lawful basis. Legitimate interests is the usual one, with a documented test of whether your interest outweighs theirs. A short, relevant letter about the approved project is easier to justify than repeated mailings.
  • Tell them where you got their details. UK GDPR Article 14 requires you to explain the source (the council's public planning register) and their rights, normally in the first letter. The legitimate interests assessment template covers the wording.
  • Offer an easy opt-out and honour it. Keep a stop list by address.
  • Do not call or text without screening and a basis. Individuals registered with the TPS must not receive marketing calls, and marketing texts to individuals need consent unless the soft opt-in applies.

Business applicants (a company changing the use of a shop, a developer building flats) are B2B prospects. Check their status on Companies House; see the Companies House lead generation guide.

Read the council's terms. Planning portals often carry a notice about the purposes for which the information is published and about copyright in the documents. Follow it.

Rules differ in Scotland and Northern Ireland on planning procedure, though UK GDPR and PECR apply across the UK. This is general information, not legal advice; the ICO's direct marketing guidance is the primary reference.

A fictional example letter

Dear Homeowner,

We noticed on Kettleby District Council's public planning register that permission was granted on 4 November 2026 for a rear dormer at 14 Orchard Road (ref 26/01234/HOUSE).

We are a local roofing firm and build dormers in the area. If you are gathering quotes, we would be glad to visit. Our details are below.

We took your address from the public planning register. If you would prefer not to hear from us again, email [email protected] or write to the address below, and we will not contact you again.

Oak Roofing Ltd, Unit 3, Mill Lane, Kettleby. Company number 00000000.

Qualifying an application before you act

Not every approved application is worth a letter or a call. A few minutes with the documents separates real opportunities from noise.

CheckWhere to lookWhat it tells you
Scale of workProposal description and drawingsA single-storey porch and a two-storey wraparound extension are very different jobs
MaterialsConditions on the decision notice, materials schedule"Slate to match existing" or "natural stone" points to specialist trades
ConditionsDecision noticePre-commencement conditions mean a further application before work can start
Agent typeAgent name and businessA design-and-build firm may do the work itself; an independent architect usually tenders it
Applicant typeApplicant fieldA company or developer is a B2B lead; a private name is a householder
Site constraintsPlanning Data layers (conservation area, listed building, Article 4)Heritage or restricted work, often fewer competitors
Previous applicationsProperty history on the portalRepeat applications or refusals suggest a project in difficulty
Recent saleHM Land Registry price paid dataNew owners often apply for permission soon after buying

Two fictional examples show the difference:

  • 26/01234/HOUSE, rear dormer, granted, agent is an independent architectural technologist. Strong lead for a roofer: domestic, approved, design done, contractor not yet chosen. Contact the agent first, then write to the owner.
  • 26/05678/FUL, eight flats, granted, applicant is a development company with its own construction arm. Weak lead for a small roofer (the developer has its supply chain), but possibly useful for a builders' merchant or scaffolding firm approaching the developer as a business.

Score each application on the checks that matter for your trade and work the highest scores first. Keep the score and the reason with the record so you can see later which signals actually led to work.

A weekly routine

  1. Pick your patch. List the councils that cover your working area.
  2. Check weekly lists of decided applications every week, filtered to the types that suit your trade.
  3. Filter by proposal wording. For roofers: "dormer", "roof", "loft", "two storey"; for tree surgeons: "fell", "crown", "TPO".
  4. Record reference, address, type, decision date, agent and applicant fields in one sheet.
  5. Contact agents first by email or phone, as a business.
  6. Write to approved applicants by post where it fits, with the source and opt-out.
  7. Watch discharge of conditions on projects you have quoted.
  8. Suppress opt-outs and anyone who asks not to be contacted.

How Map Extract helps

Map Extract's UK property intelligence workspace (beta) is a Windows desktop module for running this routine across several councils, whether you are a trade business watching your own area or someone sending planning digests to local trades.

  • Collection from supported council portals. Choose councils from a bundled council registry and check them by hand or on a saved interval while the module is open. You can also import an authorised planning file. Each source shows its state, including access restrictions published by the council, so a selected council is never mistaken for successful collection.
  • Matching to trades with the reason shown. Import trades businesses from a CSV or JSON file or from a main scraper project, resolve postcode areas, and match applications to businesses by city or county and relevant trade category. Each match has a score and an explanation, and you can exclude unsuitable ones.
  • Approved digests only. Digests of matched opportunities for a trades business enter the shared outbox only after you approve them exactly. Nothing is sent implicitly.
  • Applicant details are not turned into an outreach list. The module does not automatically build a list of private applicants to contact.
  • Companies House support. It can read the Companies House stream with SIC targeting, with the caution that a registered office or company event does not prove building work at that address.

What it does not do: council coverage varies with portal availability and blocked or missing sources stay visible rather than being filled in; it does not supply applicants' personal contact details; it does not make your contact lawful for you. For property buyers, Auction Intelligence is a separate beta companion app that searches supported auction sources, helps estimate total costs and margins and monitors bids against targets; it is not part of the planning workflow.

Key takeaways

  • Match the application type to your trade; householder, listed building consent and discharge of conditions are the strongest signals for most trades.
  • There is no complete national feed. Work council by council; the national dataset is not ready for use yet.
  • Contact after the decision, not before. Permission normally lasts three years.
  • Approach the agent first as a business; write to private applicants by post with the source and an opt-out.
  • Do not hunt for applicants' personal phone numbers or emails, and follow each council's terms of use.

Frequently asked questions

Can I use planning applications to find customers?

Yes, with care. Planning registers are public so that people can comment on proposals, not to supply marketing lists, so read the council's terms of use first. Names and addresses of private applicants are personal data under UK GDPR. Agents such as architects are businesses and are usually the easier first contact. Post is outside PECR, but you still need a lawful basis, the source of the data and an opt-out.

Do planning applications show the applicant's phone number or email?

Usually not. Councils normally publish the applicant's name and the site address, plus the agent's name and business address, and redact personal phone numbers, emails and signatures from forms. Some councils show only the agent. Do not try to work out a private applicant's personal contact details from other sources; contact through the agent or by letter instead.

When is the best time to contact a planning applicant?

For most trades, after the decision. A granted permission means the project can go ahead, and the owner is starting to gather quotes. Before the decision, the project may change or be refused. Applications to discharge pre-commencement conditions are a strong sign that work will start soon. Permission normally lasts three years, so there is no need to rush on day one.

Which planning applications are best for roofers?

Householder applications for dormers, loft conversions, roof extensions and two-storey extensions all involve roof work, as do new dwellings and conversions in full applications. Listed building consent for re-roofing suits heritage roofers. Many ordinary re-roofs need no planning permission at all, so the register shows only part of the market. Lawful development certificates for loft conversions are another useful source.

Is there a national database of UK planning applications?

Not a complete one. Each council runs its own register. The government's planning data platform for England has a planning application dataset, but its page says it is incomplete and not yet ready for use. Scotland's councils run their own portals and Northern Ireland has a regional portal. For coverage today you need to work council by council.

Sources

  1. Planning Portal
  2. Common projects (Planning Portal)
  3. Find your local planning authority (Planning Portal)
  4. Planning Data platform
  5. Planning application dataset (Planning Data)
  6. Determining a planning application (GOV.UK)
  7. Finding a planning application (nidirect)
  8. Business-to-business marketing (ICO)

Written by the Map Extract editorial team. Found an error? Email [email protected] and we will check and correct it. How we research guides: editorial policy.

See it working on your own searches.

Start with one keyword, one location and a small limit. Review the records, then decide on a licence.

Top