Map Extract

A sensible email warm-up schedule for a new domain takes four to six weeks: two weeks of ordinary two-way mail with people who know you, then cold messages starting at around ten a day per mailbox and rising by a few every two or three days, levelling off at a few dozen. Pause the ramp whenever bounces, complaints or replies move the wrong way. Warm-up builds a sending history; it cannot fix a bad list, so verify and target before you ramp.

The schedule below is a conservative template, not a provider rule. Mailbox providers do not publish warm-up numbers. They judge reputation from authentication, complaints, bounces and engagement, and Google's FAQ notes that enforcement of its sender requirements for new domains runs "on an accelerated timetable". This post is part of the deliverability cluster; start with the cold email deliverability checklist if your DNS is not yet set up.

Before day 1

Warm-up only works on a domain that authenticates correctly. Check:

  • SPF, DKIM and DMARC pass on a test message, with the From domain aligned. Google requires SPF or DKIM for every sender and both, plus DMARC, for bulk senders (sender guidelines).
  • The domain has a simple website saying who you are, and MX records so replies arrive.
  • Each mailbox is a named user with a real signature.
  • The domain is verified in Google Postmaster Tools, so data appears once volume allows.
  • Your first list is verified, sourced, screened against suppression and limited to recipients you have a lawful basis to contact.

Per mailbox or per domain?

Both, at different levels. Providers track reputation for the domain (and for the sending IP, which on Google Workspace or Microsoft 365 is shared with many other customers). Each mailbox also has its own history and its own sending limit.

LevelWhat it means for warm-up
DomainAll mailboxes on the domain share its reputation. Three mailboxes at 30 a day is 90 a day from the domain, and a complaint spike on one affects all
MailboxEach new mailbox needs its own ramp, even on a warm domain, because its history starts at zero
IPOn shared provider IPs you cannot warm it and do not need to; on a dedicated IP, the IP needs its own ramp

Practical rule: ramp each mailbox on its own schedule, and keep a domain-wide daily total in mind. Adding a fourth mailbox to a warm domain is easier than starting a new domain, but the new mailbox still begins at the bottom of the table.

The schedule

Weeks 1 and 2: manual, two-way mail only

No cold email at all. The aim is a normal pattern of sent and received mail with replies.

DaySent per mailboxWhat to send
1 to 33 to 5Messages to colleagues, clients and suppliers who will reply
4 to 75 to 10Continue; ask a few contacts on Gmail and Outlook.com to reply
8 to 1010 to 15Add real business correspondence: quotes, follow-ups, introductions
11 to 1410 to 20Keep conversations going; sign up for and read a few genuine newsletters

Weeks 3 to 6: cold ramp

Cold messages start low and rise slowly. Keep sending the normal two-way mail alongside.

DayNew cold messages per mailboxFollow-upsCheck before moving on
15100Test message passes SPF, DKIM, DMARC
16100No hard bounces above 2
17100
18125Replies arriving, even if few
19125
22158Bounce rate under about 2%
23158
241810No spam complaints reported
251810
262010
292212
302212
312515Reply rate steady
322515
332815
36 to 403015 to 20Hold here if anything looks wrong
41 onwardsUp to your steady levelAs neededSteady level is a few dozen at most

Gaps (days 20, 21, 27, 28, 34, 35) are weekends. Most B2B senders do not send at weekends, and skipping them is part of looking like a business.

Why the numbers are this low

Provider limits are not the constraint. Google allows 2,000 messages a day for a paid Workspace user and 500 for a trial account (Gmail sending limits). Cold mail fails on reputation long before then. Recipients did not ask for it, so a few complaints matter: Google asks senders to keep the user-reported spam rate below 0.1% and never reach 0.3% (FAQ). Low, steady volume to well-chosen recipients keeps complaints and bounces rare while the domain builds history.

Signals that should pause the ramp

Hold at the current level, or step back one stage, if any of these appear:

SignalWhere you see itLikely causeAction
Hard bounces above about 2% of a day's sendBounce messagesList qualityStop, re-verify the segment, remove guessed addresses on catch-all domains
Any 5.7.x policy rejectionBounce textAuthentication or reputationRead the code; see SMTP error codes
421 4.7.0 or other deferrals from GmailBounce or delay noticesGmail rate limiting youHalve volume for several days; see Gmail 421 4.7.0
A spam complaint or angry replyRepliesTargeting or messageReview who received it and why
Replies drop to zeroInboxMessages landing in spamSend test messages; check placement
Postmaster Tools spam rate risingPostmaster ToolsComplaintsStop cold sending until it falls
Test messages to your own Gmail or Outlook.com land in spamYour test accountsContent or reputationPause, simplify the message, check links

Pause rules work best when set before you start and enforced automatically, because the temptation is always to push on.

Manual warm-up tasks

These are the tasks that produce genuine signals during weeks 1 and 2 and keep helping afterwards:

  • Send real messages that invite replies, and reply to the replies.
  • Ask two or three contacts on different providers (Gmail, Outlook.com, a Microsoft 365 company) to reply and, if your message lands in spam, to mark it as not spam.
  • Subscribe to a few newsletters you genuinely read and open them.
  • Add a calendar invitation or two; normal business mail includes them.
  • Keep a plain signature with your name, role, business and website.
  • Send in working hours, spread through the day, not in bursts.
  • Avoid attachments, URL shorteners and image-only messages.
  • Read every bounce, even early on.

Warm-up networks: pros and cons

Warm-up tools connect your mailbox to a pool of other users' mailboxes that automatically exchange messages, open them, reply and move them out of spam.

ProsCons
Little effortThe engagement is artificial; providers may learn to recognise and discount it
Creates activity on a brand new mailboxYour mailbox exchanges mail with strangers' mailboxes, some of which may have poor reputations
Some tools report placementDoes not fix unverified lists, poor targeting or complaints, which cause most problems
Usually needs broad access to your mailbox, which is a security consideration
Ongoing subscription cost

The honest view: a network can make a new mailbox look busy, but providers judge you on how real recipients react to your real messages. A verified, well-targeted list and a slow ramp do more than any network. If you use one, treat it as a supplement, keep it running at low volume, and never use it to justify sending faster than the signals allow.

Common mistakes

  • Starting cold sending on day 1 because the domain "is set up". It authenticates, but it has no history.
  • Ramping every mailbox in lock-step on a new domain, so the domain total jumps from 0 to 150 in a week.
  • Warming with one list and then switching to a lower-quality one at full volume.
  • Ignoring weekends and holidays. A sudden burst after a quiet period looks like a new sender.
  • Treating the schedule as fixed. The signals decide, not the calendar.

Warm-up messages to real prospects are marketing. In the UK the ICO's B2B guidance says you may email corporate subscribers without consent under PECR but must identify yourself and offer an opt-out; sole traders and some partnerships need consent or the soft opt-in, and named addresses need a lawful basis under UK GDPR. Other countries differ, for example Germany generally requires prior consent for B2B advertising email.

How Map Extract helps

The bulk email sender sends through your own SMTP mailboxes, and it has controls that fit the cold ramp in weeks 3 to 6:

  • An optional warm-up ramp per campaign that starts at a low send count and increases by a set amount at a set interval, so a campaign does not release its whole queue at once.
  • Caps per hour, day and month, a minimum delay between messages, and route ceilings per hour and day for each SMTP mailbox. Raising a mailbox's daily ceiling step by step is how you follow the table above.
  • Bounce auto-pause: replies and bounces are read by IMAP, and the campaign pauses itself when bounces reach the threshold (5% by default; set it lower during warm-up).
  • Per-business caps, suppression and a permission gate that holds recipients without a recorded lawful basis and opt-out route.

What it does not do: it is not a warm-up network, it does not exchange mail with other users, it does not handle the manual weeks 1 and 2 for you, and it does not check your DNS. The day-by-day schedule is yours to set; the software enforces the limits you choose.

Key takeaways

  • Allow four to six weeks: two weeks of real two-way mail, then a slow cold ramp.
  • Start at about ten new cold messages per mailbox per day and add a few every two or three days.
  • Ramp each mailbox separately and watch the domain-wide total.
  • Pause on bounces, policy rejections, deferrals, complaints or a drop in replies.
  • Warm-up networks are optional; list quality and targeting matter more.

Frequently asked questions

How long does it take to warm up a new email domain?

Plan on four to six weeks before a new domain carries a steady cold email volume. Spend the first two weeks on ordinary two-way mail with people who know you, then add cold messages slowly over the next three to four weeks. The calendar matters less than the signals: if bounces or complaints rise, hold the volume until they settle.

How many emails should I send per day when warming up a mailbox?

Start with a handful of real conversations a day, then begin cold sending at around ten new messages a day per mailbox and add a few every two or three days. Many careful senders level off at a few dozen new cold messages per mailbox per day. Provider limits are far higher, but reputation suffers long before you reach them.

Can I warm up an email domain manually without a warm-up tool?

Yes, and it produces genuine signals. Send and reply to real correspondence: suppliers, clients, colleagues, newsletters you actually read. Ask a few contacts on different providers to reply and to move a message out of spam if it lands there. Then start cold sending at low volume to your best-targeted list. It takes more effort than a tool but builds a real history.

Do email warm-up networks work?

They generate opens, replies and rescues from spam between member mailboxes, which can make a new mailbox look active. The engagement is artificial, providers may learn to discount it, and it does nothing about the real causes of poor delivery: unverified lists, poor targeting and complaints. Treat a network as optional and never as a substitute for a good list.

Sources

  1. Google: Email sender guidelines
  2. Google: Email sender guidelines FAQ
  3. Google Postmaster Tools
  4. Google Workspace: Gmail sending limits
  5. ICO: Business-to-business marketing

Written by the Map Extract editorial team. Found an error? Email [email protected] and we will check and correct it. How we research guides: editorial policy.

See it working on your own searches.

Start with one keyword, one location and a small limit. Review the records, then decide on a licence.

Top